RO Plants & Water Treatment Systems for Hospitals
A hospital uses water in more ways, and with less tolerance for failure, than almost any other building. Patients and staff drink it, kitchens cook with it, the laundry and CSSD depend on it, sterilisers and boilers run on it - and a failure anywhere in that chain is a clinical problem, not just a maintenance one. We design hospital water treatment around each of those duties separately, and we have built water treatment plants since 1996.
- Established
- 1996Established in Vasai, Mumbai
- Countries
- Plants running inNigeria · Ghana · Tanzania · Nepal & many more
- Clients
- Trusted byBisleri · Bailey · Campa · McDowell's · Mantra · Meru Spring
The challenge
What makes this sector different
Many duties, different standards
Drinking water, kitchens, laundry, sterilisers and boilers each need different water. One plant treating everything to one standard either over-treats or fails somewhere.
Sterilisers need treated feed water
Minerals in steriliser feed water end up as deposits on instruments and scale inside steam generators. Manufacturers specify feed water quality for this reason.
Supply cannot stop
The plant has to be serviceable without interrupting water to wards, theatres and the CSSD.
Hygiene of stored water
Treated water that sits in a poorly maintained tank can be recontaminated. Storage and distribution matter as much as treatment.
Segregate the water by duty
The right hospital water system is several treatment routes sharing one site, each sized for its own duty. This is cheaper to run than treating all of the hospital's water to the highest standard, and it means a fault on one line does not take out the others.
| Duty | Requirement | Typical route |
|---|---|---|
| Drinking water | Potable, low TDS, microbiologically safe | RO with UV or ozone disinfection |
| Kitchens | Potable water; no scale in equipment | Softened supply, with RO for drinking and cooking water |
| Laundry | Low hardness for detergent efficiency and linen life | Water softener |
| CSSD and steam sterilisers | Low dissolved solids, as the steriliser maker specifies | RO, with DM polishing where the specification requires it |
| Boilers and hot water | Scale control | Softener, or DM depending on boiler pressure |
Steriliser manufacturers specify feed water quality for a reason: whatever minerals the water carries end up on the instruments and inside the steam generator.
Redundancy and storage
Hospital plants are designed so they can be maintained without interrupting supply. That usually means treated water storage sized to cover a maintenance window, duty and standby pumps on critical lines, and valving that lets a stage be isolated and serviced while the rest keeps running.
Dialysis water is a separate case
Water for haemodialysis is one of the most tightly regulated water applications of all, governed by ISO 23500 and monitored far more closely than any other water in the hospital. It needs a dedicated system with its own design, materials and testing regime. If dialysis is part of your requirement, tell us at the start and we will tell you plainly whether it falls within our scope for your project.
Keeping stored water safe
Stainless steel storage tanks with proper covers, regular cleaning, and UV or ozone disinfection on stored water keep treated water from being recontaminated between the plant and the point of use. We fabricate storage tanks in-house, so they can be sized and shaped to fit the plant room.
What we need to quote
Bed count and the departments to be served, the water source and a recent analysis, details of any existing plant, the steriliser and boiler specifications, and the space available. If you are planning a new hospital, involving us at design stage makes the plant room far easier to get right.
Equipment
Systems we supply for this sector
The equipment below covers most requirements in hospitals & healthcare. Where the duty is unusual, we design against the specification instead.
Reverse Osmosis Plant (RO)
Industrial and commercial RO plants up to 10,000+ LPH for factories, hotels, hospitals and housing societies. Built in Vasai, Mumbai since 1996.View specifications →
Water Softening Plant
Automatic water softening plants for boilers, cooling towers, hotels and housing societies. Removes hardness from borewell water. Made in Vasai since 1996.View specifications →.jpg&w=3840&q=75)
Dosing, Ozonation & UV Systems
Ozone generators for water tanks and bottling plants, UV sterilisers and chemical dosing systems for water disinfection. Manufacturer in Mumbai since 1996.View specifications →
AMC & Plant Maintenance
Annual maintenance contracts for RO, DM and softening plants: scheduled servicing, membrane cleaning, resin checks and genuine spares. Vasai, Mumbai, Thane.View specifications →FAQ
Frequently asked questions
Can't find your answer? Call or WhatsApp us and we'll answer it.
What size RO plant does a hospital need?
It depends on bed count and on which duties the RO serves. Drinking and cooking water is a relatively small volume; sterilisers and other specialist duties are sized on their own requirements. We size each duty separately rather than quoting one plant for the whole building.
Does a hospital need a water softener as well as an RO plant?
Usually, yes. Softening suits the laundry, boilers and hot water system, where the problem is scale; RO serves drinking water and sterilisers, where dissolved solids matter.
What water should feed a steam steriliser?
Whatever the steriliser manufacturer specifies - typically low-conductivity treated water produced by RO, with DM polishing where the specification is tight. Using untreated or softened water leaves deposits on instruments and scale in the steam generator.
Do you supply RO plants for dialysis?
Dialysis water is governed by ISO 23500 and needs a dedicated, closely monitored system. Tell us at enquiry stage if dialysis is part of your requirement and we will tell you plainly whether it falls within our scope for your project.
Can the plant be serviced without cutting off supply?
Yes, if it is designed for it. Treated water storage, standby pumps and isolation valving let each stage be maintained while the hospital keeps drawing water. We build that in as standard for hospital plants.
Get a quotation
Send us your water analysis. We'll size the plant.
Tell us the source, the daily demand and what the water is for. We reply with a recommended treatment train and a quotation.